First, the bike is put through our service process.

Maintenance Items Performed:
Change oil and filter, flush brake fluids, flush clutch fluid, flush transmission oil, flush primary oil and adjust primary chain, lube and adjust chain or belt, flush final drive oil, check coolant condition and flush if necessary, check and adjust steering stem bearings, lube and adjust all cables, service the clutch(dry clutch only), check air filters, replace if necessary, set tire pressures, tighten nuts and bolts, check for oil leaks, clean battery terminals, tighten spokes, check running condition, adjust fi/carbs if necessary, lube pivots and locks. (All items performed where applicable).

A New Hampshire State Inspection is Performed.

Test Drive:
Verify proper running condition, check suspension and handling, verify proper shifting through all gears, check clutch operation, check for abnormal sounds or vibrations.

Other Checks:

• California emissions check if under 7500miles
• Key, tool kit and owner’s manual verification
• Installation of battery tender lead for easy charging
• Documentation of all known options and accessories
  
  

Then the bike is put through our restorative detailing process.

• Remove decals
• Degrease
• Rust removal
• Wash and dry bike
• Buff bodywork
• Polish bare metal
• Clean black plastic and rubber
• Polish lenses and windscreens
• Thorough documentation of the vehicles cosmetic condition
  

Then we put a 1 month/1000mi in-house warranty good only at our dealership covering the following items.

Engine
All internally lubricated parts; valve covers, intake manifolds; oil pump; fan motor; valves; engine
mounts; cylinder head(s); engine block/crankcase and cylinder barrels if damaged as a result of the failure of an internally lubricated covered engine component.

Water pump
Impeller shaft; bearings; bushings and housing.

Turbocharger
Internal parts; vanes; shafts; bearings, bushings, waste gate and housing if damage is caused by
a failure of any of the above covered components.

Transmission
All internally lubricated parts contained within the transmission case: gears: bearings: internal drive
gears: internal selector mechanism and transmission mounts. Transmission case if damaged as a
result of the failure of an internally lubricated transmission component. (Clutch assembly and cable
are not covered).

Primary Drive
All internally lubricated parts (except clutch and hub assemblies) contained within the primary drive
case; all gears; bearings; internal drive gears and chains; internal selector mechanism. Primary
drive case if damaged as a result of the failure of a covered primary drive component.

Drive Axle Assembly (Shaft driven motorcycles and ATV’s)
Differential housing; transaxle housing; final drive housing; all internally lubricated parts of the
foregoing; axle shafts; constant velocity joints; universal joins; drive shafts; locking hubs; hub
bearings; locking rings; supports; retainers and bearings.

Pre-existing conditions
Any known documented pre-existing conditions are excluded from this warranty.